Clever stand which makes working on your bike much easier! This stand clamps safely to the bolts just underneath the rider footrests, and allows you to lift the bike securely in a similar action to a centrestand.

Useful substitute for a centre stand.

Needs 2 x 18mm 0.5 inch drive sockets to fit a V11 (not supplied)

 This part is available by special order, request a quote

 979717 MG979717

Replacement clutch plate for single plate RAM clutches

Torque setting for fitting this is 25Nm with a thread locking compound

 This part is available by special order, request a quote

Pair of stylish Kappa soft panniers, perfect for V7 and V9 models.

• 550D Polyester construction with PVC coating
• 2mm thick synthetic leather (PU) detailing
• 190D Nylon inner lining material
• 14 litre capacity for each bag
• Product complies with Reach regulations
• Roll-top closure system
• Saddlebag straps with hook and loop fastening closure
• Front handle
• Waterproof removable inner lining with thermo-sealed seams
• Strap with ring loop to fasten to double D-ring
• Front waterproof zip
• KAPPA RAMBLER logo printed on patch
• Bags come with a TNT bag with the KAPPA RAMBLER logo for storage

 Order now and we will post your order within 7 days.

Brembo PS 13 handlebar mounted clutch master cylinder, supplied complete with lever.

 This part is available by special order, request a quote

Polished aluminium instrument console kit for 80mm instruments (as used on Le Mans 1, 2, T3, V50 etc...). This high quality kit is specially made for Gutsibits and consists of the following parts:

• Polished aluminium clock surround front with 80mm holes for instruments, slotted ignition switch hole and 8mm instrument light holes
• 6 LEDs with chrome bezels (small spade connectors to rear) for indicators, oil, charge system, neutral and high beam warning light
• Polished aluminium instrument surrounds (odometer surround includes hole for reset knob)
• Polished aluminium instrument backs (attach with existing nuts)

Manufactured from 6mm aluminium, this this instrument binnacle will not fatigue with use and is an excellent way to present the standard 80mm Veglia instruments. Bolts to handlebar yoke clamps. NB instruments and ignition switch shown in photo for illustration purposes only.
This is a high quality UK manufactured part made exclusively for Gutsibits, do not confuse with lesser alternatives. These kits are often prepared to order so please allow for a couple of days delay before your order is sent.

NB This kit works with the ignition switch ELA17735, later type switches will not fit into the predrilled ignition switch hole. On models with cable operated remote odometer resets the reset knob will need to be relocated. Check the depth of your instruments before ordering, this kit is intended for 48mm deep instruments with 60mm stud centres

Instruments with 60 degree or similar angle drives to the rear will require you to enlarge cable cutouts in the plates that make up the rear of the kit

 1 in stock

Black 55 litre Junior top box / top case to match Hepco and Becker Junior panniers. This is the classic Hepco and Becker top box design. Sized to take two helmets

• Unbreakable, special double walled shell made of impact resistant plastic which absorbs bumps and falls
• Completely waterproof thanks to special seals
• Fitted with rugged metal locks and an ergonomic carry handle
• Aerodynamic design
• Racks and accessories available separately

This is a great value top case which are quickly and securely fitted to any Moto Guzzi. The discreet and classic styling looks right on any Guzzi from the 1970's to the present day. Supplied with two keys. See LUA70127 for a Guzzi badge to fit these panniers. This latches to any Hepco or Guzzi rack with a oblong section at the rear, e.g. LUA61051

 This part is available by special order, request a quote

Factory upgraded oil pump with 16mm wide teeth as fitted to later big twins. Gives increased flow and can be retro fitted to earlier 850/1000 models which originally had 14mm teeth pumps

 This part is available by special order, request a quote

 30146400 GU30146400 30 14 64 00
 3014 6400 3014.6400 30.14.64.00

Black 40 litre Junior top box / top case to to match Hepco and Becker Junior panniers. This is the classic Hepco and Becker top box design. This case will take a single helmet

• Unbreakable, special double walled shell made of impact resistant plastic which absorbs bumps and falls
• Completely waterproof thanks to special seals
• Fitted with rugged metal locks and an ergonomic carry handle
• Aerodynamic design
• Racks and accessories available separately

These are a great value top case which are quickly and securely fitted to any Moto Guzzi. The discreet and classic styling looks right on any Guzzi from the 1970's to the present day. Supplied with two keys. See LUA70127 for a Guzzi badge to fit these panniers. This will latch to any Hepco or Guzzi rack with a oblong section at the rear, e.g. LUA61051

 This part is available by special order, request a quote

Black 55 litre Junior top box / top case to match Hepco and Becker Junior Flash panniers. This is the classic Hepco and Becker top box design. Sized to take two helmets

• Silver painted covers can be removed for colour matching to your bike
• Unbreakable, special double walled shell made of impact resistant plastic which absorbs bumps and falls
• Completely waterproof thanks to special seals
• Fitted with rugged metal locks and an ergonomic carry handle
• Aerodynamic design
• Racks and accessories available separately

This is a great value top case which are quickly and securely fitted to any Moto Guzzi. The discreet and classic styling looks right on any Guzzi from the 1970's to the present day. Supplied with two keys. See LUA70127 for a Guzzi badge to fit these panniers. This latches to any Hepco or Guzzi rack with a oblong section at the rear, e.g. LUA61051

 This part is available by special order, request a quote

Stainless steel crossover pipe to replace large balance box, sounds much better than the original! For models not fitted with Lambda sensor

Handmade to order in Italy
Improves gas flow, performance and access to your oil drain plug. Supplied with two stainless steel exhaust clamps. Also available in a satin finish

 This part is available by special order, request a quote